[cisco-voip] Auto login IP Phone Agent

[Ryan Ratliff]

So what URL is in your service definition?   The document you specified clearly states that the default URL is IPAgentInitial.jsp and the one-button login needs to call IPAgentLogin.jsp.  If you are giving the parameters to IPAgentInitial.jsp it won't care, and will behave exactly as you are seeing.

-Ryan

On Jul 23, 2010, at 9:55 AM, Marty van de Veerdonk wrote:

The URL is working, only the data fields aren't filled automatically

When I fill it in manually I can login.

----- Oorspronkelijk bericht -----
Van: "Ryan Ratliff" <rratliff at cisco.com>
Aan: "Marty van de Veerdonk" <marty at voiceidentity.nl>
Cc: "Ed Leatherman" <ealeatherman at gmail.com>, "cisco-voip" <cisco-voip at puck.nether.net>
Verzonden: Vrijdag 23 juli 2010 15:44:28
Onderwerp: Re: [cisco-voip] Auto login IP Phone Agent

Make sure you are calling the correct URL in the service definition.  A packet capture will show you if the destination URL for submitting the login is the same as the one used for the initial request.

-Ryan

On Jul 23, 2010, at 9:18 AM, Marty van de Veerdonk wrote:

Ed,
I have the variables as stated, but the strange thing is when I select the service I get:
ID
Password
Extension

Tried to use this in the service definition, but no success


----- Oorspronkelijk bericht -----
Van: "Ed Leatherman" <ealeatherman at gmail.com>
Aan: "Marty van de Veerdonk" <marty at voiceidentity.nl>
Cc: "cisco-voip" <cisco-voip at puck.nether.net>
Verzonden: Vrijdag 23 juli 2010 14:41:33
Onderwerp: Re: [cisco-voip] Auto login IP Phone Agent

I have used this with UCCX 4 up to 7 so far with no problems.

Make sure the ID, Ext, Pwd variables are exactly how they appear in
the doc, I think they might be case sensitive.Might just have one of
them off and so it re-prompts for the login.

If you want to really make it easy for them and have enough buttons,
you can also setup service buttons for "ready" etc as well. they are
just calls to URL with different parameters.

On Fri, Jul 23, 2010 at 7:51 AM, Marty van de Veerdonk
<marty at voiceidentity.nl> wrote:
> Hello,
> i'm using IP phone agent on CCM6 to contact to ICM 7.
> The service url works, but I would like to make login procedure
> automatically.
>
> Used this manual, but still I need to enter the ID, ext and password
> http://www.cisco.com/en/US/products/sw/custcosw/ps1846/products_tech_note09186a008029e6d5.shtml#procConfiguring
>
> Any ideas?
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>



-- 
Ed Leatherman
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100723/6f55e794/attachment.html>