[cisco-voip] Cisco IP Communicator Time&Data

[ROZA, Ariel]

Bob,

 The behavior is right.

  IP Communicator takes the clock from the PC, but it applies the
timezone offset recived from CUCM

i.e Considering both an IP Phone and an IPCommm registered to the same
Callmanager server

CUCM time: 18:00 Timezone= -3  

The clock on the desktop IP Phones show 17:00
If the PC with IP Communicator has at clock of 17:00, after applying the
timezone, IPComm will show 16:00

Hope this helps.

Regards,

Ariel

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Roby
Sent: Lunes, 26 de Julio de 2010 11:33 a.m.
To: cisco-voip
Subject: [cisco-voip] Cisco IP Communicator Time&Data

Hi.
I have the following problem.

Within a cluster of eight CUCM 7.1(3), I have several phones (IP
Communicator 7.0.4) behind a firewall. These phones are registered with
CUCM, and are configured correctly (device pool with Date/Time group
Information).

But if I change the time pc, also changes the time of the phone: this is
not correct, right? What could be the problem? Ports to open on the
firewall? Can you help me, please?

Thanks a lot.
Best regards,
Bob


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip