[cisco-voip] Anyone ever see a T1 with CD, No alarms and be down...?

[Ted Nugent]

had a similar issue a few years back and turned out the extended wiring was
pinched and shorted in the ceiling someplace, moved to another couple pairs
and it cleared. also maybe crossover over straight through or vice versa,
would be weird but might be worth a shot as well.


On Wed, Jul 28, 2010 at 12:38 PM, Jonathan Charles <jonvoip at gmail.com>wrote:

> VoiceRtrr#sh controllers t1
> T1 0/0/0 is down.
>   Applique type is Channelized T1
>   Cablelength is short 110
>   No alarms detected.
>   alarm-trigger is not set
>   Soaking time: 3, Clearance time: 10
>   AIS State:Clear  LOS State:Clear  LOF State:Clear
>   Version info Firmware: 20090408, FPGA: 13, spm_count = 0
>   Framing is ESF, Line Code is B8ZS, Clock Source is Line.
>   CRC Threshold is 320. Reported from firmware  is 320.
>   Data in current interval (283 seconds elapsed):
>      2318053 Line Code Violations, 60446 Path Code Violations
>      14 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
>      0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 283 Unavail
> Secs
>   Total Data (last 24 hours)
>      682527740 Line Code Violations, 26641064 Path Code Violations,
>      4751 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins,
>      0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 86400 Unavail
> Secs
> VoiceRtr#
>
> The CD light is lit on the router.
>
> Telco tests clean to the CSU.
>
> I am confused...
>
> Any ideas?
>
> Jonathan
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100728/4c3afebf/attachment.html>