[cisco-voip] Ringback tone to from Ericsson MD110 ( PRI H323 integration)

John.VanLaecke at ghd.com John.VanLaecke at ghd.com
Wed Jul 28 23:21:47 EDT 2010


Dana,

Add these to the dialpeer for calls from pabx to voip

 progress_ind alert enable 8
progress_ind connect enable 8



Regards,

John Van Laecke 
Network Administrator 

GHD   Accomplish More Together
T: 61 7 3316 4456 | M:0427 015 232 | V: 414456 | E: John.vanlaecke at ghd.com
Level 2, 201 Charlotte Street QLD AUSTRALIA | www.ghd.com.au
Water | Energy & Resources | Environment | Property & Buildings | 
Transportation

Please consider the environment before printing this email 



From:
"Dana Tong" <Dana.Tong at ivision.com.au>
To:
<cisco-voip at puck.nether.net>
Date:
29/07/2010 01:20 PM
Subject:
[cisco-voip] Ringback tone to from Ericsson MD110 ( PRI H323
        integration)
Sent by:
cisco-voip-bounces at puck.nether.net



Hi all,

Having some problems with a PABX integration for a customer. The Ericsson 
MD110 is a straight PRI connection with H323 dial peers (no QSIG) and from 
what I understand QSIG is not an option.

The system is setup like so:

ISDN --- H323 GW --- CUCM 8.0(2C)
            |
            |_____ Ericsson MD110



All inbound calls in a 200 number DID are routed to CUCM. There is a route 
pattern in CUCM to send unknown numbers back to the H323 gw with a 
steering code which then routes via POTS dialpeer to the PABX.

Calls from external to IP phones has ringback tone
Calls from external to PABX phones has ringback tone

Call from IP phones to PABX phones do not have any tone.



I've tried a number of different combinations of progress-ind alert, 
setup, progress, connect etc and "tone ringback alert-no-pi" as well as 
some of the CUCM service parameters such as:

Send H225 User Info Message  - Use ANN for Ringback

Check Progress Indicator Before Establishing Media - True


but no such luck...

Does anyone know what I might be able to do to achieve a ringback tone?

Thanks
Dana




Debug for the call from IP phone to PABX phone:

033613: Jul 29 13:14:30: ISDN Se0/3/1:15 Q931: TX -> SETUP pd = 8  callref 
= 0x2A6A 
        Sending Complete 
        Bearer Capability i = 0x8090A3 
                Standard = CCITT 
                Transfer Capability = Speech 
                Transfer Mode = Circuit 
                Transfer Rate = 64 kbit/s 
        Channel ID i = 0xA98381 
                Exclusive, Channel 1 
        Progress Ind i = 0x8181 - Call not end-to-end ISDN, may have 
in-band info 
        Calling Party Number i = 0x4181, 'xxxx7900' 
                Plan:ISDN, Type:Subscriber(local) 
        Called Party Number i = 0xC1, 'xxxx8899' 
                Plan:ISDN, Type:Subscriber(local)
033614: Jul 29 13:14:30: ISDN Se0/3/1:15 Q931: RX <- CALL_PROC pd = 8 
callref = 0xAA6A 
        Channel ID i = 0xA98381 
                Exclusive, Channel 1
033615: Jul 29 13:14:30: ISDN Se0/3/1:15 Q931: RX <- ALERTING pd = 8 
callref = 0xAA6A 
        Progress Ind i = 0x8182 - Destination address is non-ISDN 
swanbnk-3825-r01#
swanbnk-3825-r01#
swanbnk-3825-r01#
033616: Jul 29 13:14:33: ISDN Se0/3/1:15 Q931: TX -> DISCONNECT pd = 8 
callref = 0x2A6A 
        Cause i = 0x8290 - Normal call clearing








Debug for the working external call:


033619: Jul 29 13:15:18: ISDN Se0/3/0:15 Q931: RX <- SETUP pd = 8  callref 
= 0x003C 
        Sending Complete 
        Bearer Capability i = 0x8090A3 
                Standard = CCITT 
                Transfer Capability = Speech 
                Transfer Mode = Circuit 
                Transfer Rate = 64 kbit/s 
        Channel ID i = 0xA1838B 
                Preferred, Channel 11 
        Called Party Number i = 0xC1, 'xxxx8899' 
                Plan:ISDN, Type:Subscriber(local)
033620: Jul 29 13:15:18: ISDN Se0/3/0:15 Q931: Received SETUP  callref = 
0x803C callID = 0x285E switch = primary-net5 interface = User 
033621: Jul 29 13:15:18: ISDN Se0/3/0:15 Q931: TX -> CALL_PROC pd = 8 
callref = 0x803C 
        Channel ID i = 0xA9838B 
                Exclusive, Channel 11
033622: Jul 29 13:15:18: ISDN Se0/3/1:15 Q931: Sending SETUP  callref = 
0x2A6B callID = 0xA9EC switch = primary-net5 interface = Network 
033623: Jul 29 13:15:18: ISDN Se0/3/1:15 Q931: TX -> SETUP pd = 8  callref 
= 0x2A6B 
        Sending Complete 
        Bearer Capability i = 0x8090A3 
                Standard = CCITT 
                Transfer Capability = Speech 
                Transfer Mode = Circuit 
                Transfer Rate = 64 kbit/s 
        Channel ID i = 0xA98381 
                Exclusive, Channel 1 
        Progress Ind i = 0x8181 - Call not end-to-end ISDN, may have 
in-band info 
        Called Party Number i = 0xC1, xxxx8899' 
                Plan:ISDN, Type:Subscriber(local)
033624: Jul 29 13:15:19: ISDN Se0/3/1:15 Q931: RX <- CALL_PROC pd = 8 
callref = 0xAA6B 
        Channel ID i = 0xA98381 
                Exclusive, Channel 1
033625: Jul 29 13:15:19: ISDN Se0/3/1:15 Q931: RX <- ALERTING pd = 8 
callref = 0xAA6B 
        Progress Ind i = 0x8182 - Destination address is non-ISDN 
033626: Jul 29 13:15:19: ISDN Se0/3/0:15 Q931: TX -> ALERTING pd = 8 
callref = 0x803C 
        Progress Ind i = 0x8182 - Destination address is non-ISDN 
swanbnk-3825-r01#
swanbnk-3825-r01#
swanbnk-3825-r01#un al
033627: Jul 29 13:15:21: ISDN Se0/3/0:15 Q931: RX <- DISCONNECT pd = 8 
callref = 0x003C 
        Cause i = 0x8090 - Normal call clearing
033628: Jul 29 13:15:21: ISDN Se0/3/0:15 Q931: TX -> RELEASE pd = 8 
callref = 0x803C
033629: Jul 29 13:15:21: ISDN Se0/3/0:15 Q931: RX <- RELEASE_COMP pd = 8 
callref = 0x003C
033630: Jul 29 13:15:21: ISDN Se0/3/1:15 Q931: TX -> DISCONNECT pd = 8 
callref = 0x2A6B 
        Cause i = 0x8290 - Normal call clearing
033631: Jul 29 13:15:21: ISDN Se0/3/1:15 Q931: RX <- RELEASE pd = 8 
callref = 0xAA6B 
        Cause i = 0x8190 - Normal call clearing
033632: Jul 29 13:15:21: ISDN Se0/3/1:15 Q931: TX -> RELEASE_COMP pd = 8 
callref = 0x2A6Bl






______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
______________________________________________________________________

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

_____________________ 
This e-mail has been scanned for viruses by MessageLabs.



_____________________ 
This email and all attachments are confidential. For further important information about emails sent to or from GHD or if you have received this email in error, please refer to http://www.ghd.com/emaildisclaimer.html .
_____________________ 
This e-mail has been scanned for viruses by MessageLabs.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100729/b0e5c971/attachment.html>


More information about the cisco-voip mailing list