[cisco-voip] Cube and upgrade from 12.4 to 15.1.2

[Brandon Bennett]

On Thu, Jul 29, 2010 at 7:59 AM, Nick Matthews <matthnick at gmail.com> wrote:

> CUBE is still a paper license, so that shouldn't matter as long as the
> voice IOS feature set is enabled.  Since you're getting a SIP message I
> assume it is.
>
> I think seeing 'debug ccsip messages' and the rest of the dial peers would
> be more helpful.
>
> -nick
>
>
>
It actualy does starting in 15.1(T).  There is a trusted list of IPs that
are allowed to signal IN to a gateway/cube.  They are auto built based
destinations in dial-peers, but you can also add to them.   This
functionality is also on by default.  See:
http://www.cisco.com/en/US/docs/ios/15_1/release/notes/151TNEWF.html#wp1063037

denqc1cube1#show ip address trusted list
IP Address Trusted Authentication
 Administration State: UP
 Operation State:      UP

IP Address Trusted Call Block Cause: call-reject (21)

VoIP Dial-peer IPv4 Session Targets:
Peer Tag        Oper State      Session Target
--------        ----------      --------------
1000            UP              ipv4:10.1.32.18
1001            UP              ipv4:10.1.32.19
2000            UP              ipv4:10.1.61.13
2001            UP              ipv4:10.146.13.13
9000            UP              ipv4:10.1.69.1
9001            UP              ipv4:10.1.69.9

IP Address Trusted List:


-Brandon
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100729/d5445e5b/attachment.html>