[cisco-voip] SpeedDial/PhoneBook dialing with Client Matter Code (CMC)

[Wes Sisk]

I do not believe there is any provision for speed dials to work with 
CMC.  If call is initiated via CTI there are CTI methods for the CMC 
challenge/response.

/Wes

On Saturday, May 29, 2010 3:50:33 AM, Robert Hass <robhass at gmail.com> wrote:
> Hi
>
> I have CUCM version 7.1(5) and for billing reasons We implemented Client
> Matter Codes (CMC) in this system. For example (CMC - Description):
>
> 1 - private calls
> 2 - business calls - general (not assigned to specific project)
> 3 - business calls - project #1
> 4 - business calls - project #2
> 5 - business calls - project #3
> etc.
>
> All outside Route Patterns have enabled CMC.
>
> We would like to implement dialing from Speeddial's and Personal PhoneBook
> (XML application) with CMC number included togeather with the destianation
> telephone number. Is it possible on CUCM 7.1 ? Eg. User has Speeddial-2
> created to his wife and it should automaticly add CMC 1.
>
> I tried speeddial's like this:
>
> 0telephone_number1 albo 0telephone_number*1 - (where 1 is CMC code) but
> without any success.
>
> Kind Regards,
> Robert
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>