[cisco-voip] SNMP master agent on CUCM with vmware

[Bill]

VMware may be supported but your VMware configuration is probably not
supported. :-)

 

 

 

  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Aman Chugh
Sent: Thursday, June 03, 2010 7:48 AM
To: Wes Sisk
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] SNMP master agent on CUCM with vmware

 

For the Archives , I installed CUCM 8.0.2 in the lab on Vmware and now see
SNMP master agent started.

 

BTW - 8.0.2 does not have the vmware unsupported warning on the console and
Gui shows my virtual machine configuration.

 

Regards,

Aman

On Wed, Jun 2, 2010 at 1:18 AM, Wes Sisk <wsisk at cisco.com> wrote:

CM8.0 was first version to formally support vmware. What you observe is one
of the artifacts of attempting to deploy CM on unsupported platform.  You
may have better results with a version of CM that actually supports a
virtual infrastructure.

/Wes 



On Tuesday, June 01, 2010 1:53:23 PM, Aman Chugh
<mailto:aman.chugh at gmail.com> <aman.chugh at gmail.com> wrote:

 

I am working on POC for a network management solution and have CUCM 7.0.1
installed on Esxi 4.0. I am not able to get SNMP master agent platform
service to start in CUCM. I understand that it is a virtual enviroment and
snmp needs a real hardware. Is thier any workaround available to get it to
work.

 

TIA

Aman

 






  _____  



 
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
  

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100603/e1189bae/attachment.html>