[cisco-voip] SNMP master agent on CUCM with vmware

Aman Chugh aman.chugh at gmail.com
Thu Jun 3 08:48:11 EDT 2010


For the Archives , I installed CUCM 8.0.2 in the lab on Vmware and now see
SNMP master agent started.

BTW - 8.0.2 does not have the vmware unsupported warning on the console and
Gui shows my virtual machine configuration.

Regards,
Aman

On Wed, Jun 2, 2010 at 1:18 AM, Wes Sisk <wsisk at cisco.com> wrote:

> CM8.0 was first version to formally support vmware. What you observe is one
> of the artifacts of attempting to deploy CM on unsupported platform.  You
> may have better results with a version of CM that actually supports a
> virtual infrastructure.
>
> /Wes
>
>
> On Tuesday, June 01, 2010 1:53:23 PM, Aman Chugh <aman.chugh at gmail.com><aman.chugh at gmail.com>wrote:
>
>
> I am working on POC for a network management solution and have CUCM 7.0.1
> installed on Esxi 4.0. I am not able to get SNMP master agent platform
> service to start in CUCM. I understand that it is a virtual enviroment and
> snmp needs a real hardware. Is thier any workaround available to get it to
> work.
>
> TIA
> Aman
>
> ------------------------------
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100603/577fc7c9/attachment.html>


More information about the cisco-voip mailing list