[cisco-voip] CUCM8, Unity, Initial Configurations

[Ed Leatherman]

I have the IP Telephony Troubleshooting book by Paul Giralt (I think,
book's at the office) from cisco press - it's pretty good for
reference although probably not something you'd necessarily read as a
tutorial.

I also have a copy of the best practices for call manager but its from
like version 3.. it was decent but I don't have any idea how
up-to-date the latest version is.

On Mon, Jun 7, 2010 at 8:48 PM, Dan Letkeman <danletkeman at gmail.com> wrote:
> Hello,
>
> I'm new to CUCM, and I was wondering if the Cisco Press books are a
> good place to start learning best practices, and basic configurations?
>  I've done a few CME multi site installations, so I have a basic
> understanding of things, registering phones, extensions, DN's,
> dial-peer's, etc.  We are going to be deploying a new system soon,
> with two CUCM appliances, one Unity appliance, one voice gateway, one
> or two remote sites with SRST routers, and 50-100 phones to start.
>
> I know from the research I've done so far, I will need to find out how
> to terminate the PRI from our provider and configure the voice gateway
> to connect to the CUCM, setup the SRST connection to CUCM, and learn
> the basics of the CUCM management.  From what I can tell from the
> ciscopress.com site, these topics are included in the books.
>
> Any other recommendations would be appreciated.
>
> Thanks,
> Dan.
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>



-- 
Ed Leatherman