[cisco-voip] Dial Tone

[Jim McBurnett]

Try:
Off-hook to First Digit Timer in Service parameters for CM service under Clusterwide parameters Phone settings


Off-hook to First Digit Timer: 
This parameter specifies the maximum time that Cisco CallManager will wait to receive the first digit that the user dialed. 
If a digit is not received by the time that this parameter specifies, Cisco CallManager terminates the call. 
  
This is a required field. 
  
Default:  15000 
  
Minimum:  0 
  
Maximum:  150000 
  
Unit: msec 






From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Webber, Bill
Sent: Tuesday, June 08, 2010 1:45 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Dial Tone

Is there a setting to increase the duration of dial tone when placing an outgoing call?  


 Bill Webber 
2900 Community College Avenue
MSS-500
Cleveland, OH 44115
216-987-4372