[cisco-voip] Dial Tone

[Webber, Bill]

After further investigation it was discovered that these phone are
programmed by the vendor to automatically dial a 9 prior to the caller
dialing the number.  Therefore one digit has already been dialed so it
appears this is an inter-digit timeout issue.

 

 

  Bill Webber 

2900 Community College Avenue

MSS-500

Cleveland, OH 44115

216-987-4372







From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Mac GroupStudy
Sent: Thursday, June 10, 2010 8:24 PM
To: ccieid1ot
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Dial Tone

 

My bad, the command is "timeouts initial".

On Thu, Jun 10, 2010 at 8:20 PM, Mac GroupStudy <
mac.groupstudy at gmail.com> wrote:

I think what you are looking for is "Digits before first". I know that
is a CLI config on an analog port and I am certain it is in CUCM as well
but I don't have access to one right now to identify its
number/location. I have it on a slide and I will look it up and get back
with you.

 

On Thu, Jun 10, 2010 at 4:41 PM, ccieid1ot <ccieid1ot at gmail.com> wrote:

Yes, you're right.  I misinterpret the question.

On Tue, Jun 8, 2010 at 3:15 PM, Cristobal Priego <
cristobalpriego at gmail.com> wrote:

I thougut the T.302 timer was for interdigit time out
correct me if i'm wrong

2010/6/8 ccieid1ot <ccieid1ot at gmail.com>

	 

	T.302 timer in CCM service.

	On Tue, Jun 8, 2010 at 12:52 PM, Dennis Heim <
Dennis.Heim at cdw.com> wrote:

		You mean like the time before the cisco lady tells you
how to use your phone?

		 

		Dennis Heim
		Network Voice Engineer
		CDW  Advanced Technology Services
		11711 N. Meridian Street, Suite 225
		Carmel, IN  46032
		
		317.569.4255 Office
		317.569.4201 Fax
		317.694.6070 Cell

		dennis.heim at cdw.com
		cdw.com/content/solutions/unified-communications/
<http://www.cdw.com/content/solutions/unified-communications/> 

		 

		 

		From: cisco-voip-bounces at puck.nether.net [mailto:
cisco-voip-bounces at puck.nether.net] On Behalf Of Webber, Bill
		Sent: Tuesday, June 08, 2010 1:45 PM
		To: cisco-voip at puck.nether.net
		Subject: [cisco-voip] Dial Tone

		 

		Is there a setting to increase the duration of dial tone
when placing an outgoing call?  

		 

		 

		  Bill Webber 

		2900 Community College Avenue

		MSS-500

		Cleveland, OH 44115

		216-987-4372

		
		
		

		 

		_______________________________________________
		cisco-voip mailing list

		
		cisco-voip at puck.nether.net

		https://puck.nether.net/mailman/listinfo/cisco-voip

	
	
	_______________________________________________
	cisco-voip mailing list
	cisco-voip at puck.nether.net
	https://puck.nether.net/mailman/listinfo/cisco-voip

 



_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100611/60db09b2/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 2846 bytes
Desc: image004.jpg
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100611/60db09b2/attachment.jpe>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 2846 bytes
Desc: image001.jpg
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100611/60db09b2/attachment-0001.jpe>