[cisco-voip] CUCM Upgrade Tool

[Ryan Ratliff]

Nothing has changed.  The UCSInstall_UCOS file that is posted on cisco.com for 7.x upgrades is the same file that will get you from a (supported) 6.x version as well as a 7.x upgrade.  It is the full build, just not bootable.  

I can't speak to any efforts to make software delivery downloadable but I think everyone agrees it would be a very good thing.

-Ryan

On Jun 11, 2010, at 7:02 PM, Scott Voll wrote:

> So it's changed?  the media for an upgrade from 6.1 to 7.1 can be downloaded?  and only the PAK is needed via the PUT tool?
> 
> If this is true, is Cisco looking at a electronic version of the PUT Tool rather then waiting weeks for a piece of paper?
> 
> Scott
> 
> On Fri, Jun 11, 2010 at 11:19 AM, Ryan Ratliff <rratliff at cisco.com> wrote:
> http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a0080b31514.shtml
> 
> This was just posted today and I'd love to get your feedback.  The goal is to present a concise list of information for customers and partners to use when looking at a CUCM upgrade.  Topics it covers is license info, caveats, one-step or two-step upgrade requirements, download location, etc.
> 
> The "destination versions" covered are 6.1(5), 7.1(3), 7.1(5), and 8.0.
> 
> You can use the feedback form on the tool itself or email me directly.
> 
> Thanks!
> 
> -Ryan
> 
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100614/2d86e425/attachment.html>