[cisco-voip] call forward all to voicemail

[Dana Tong]

Hi Michael,

 

Check the Call Forward All CSS. Make sure all of your Call Forward CSS's
are not blank. Is the pilot in a partition that the CFwd CSS can reach?

 

Cheers

D

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Michael Muscat
Sent: Tuesday, 15 June 2010 11:35 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] call forward all to voicemail

 

Using CM7.1.5 and Unity connection 7.1.5

 

I can dial the Unity pilot at ext 5000 without any issues.  I can also
press the messages button on the phones without any issues.  The problem
I am having is when a user presses the CFWDALL softkey then presses the
messages key or enters ext 5000 we just get a busy tone.  I have plenty
of unity ports available so I don't think that's the problem.  Any help
can be appreciated.

 

Thanks,

Michael Muscat

michaelm at umcu.org

 


______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
______________________________________________________________________


______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
______________________________________________________________________
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100615/ca1fc88e/attachment.html>