[cisco-voip] 7.1(3)SU2 CCMService SNMP Trap Destination community string drop down empty

[Joe Martini]

Jason,

What access privileges are set on your community string?  I believe you need to have some kind of "notify" for it to show up.  I currently have a readwrite that does not show up, and a notifyonly that does show up under the drop down menu.

Joe


On Jun 16, 2010, at 3:10 PM, Jason Aarons (US) wrote:

CallManager 7.1(3)SU2 on MCS7835I3
 
CCMService > SNMP >v1v2 > Notification Destination > Add New
 
SNMP Notification Destination Configuration
 
Community String <Drop Down>  is empty
 
In Tools > Control Center - Features Services I’ve restarted Cisco CallManager SNMP Service but still don’t get anything under Notification Community String drop down, even though SNMP > v1/v2>  Community String shows the community string I entered. I even tried delete community string/restart SNMP/add string with the Create New Community String in the Notification Destination menu.
 
 
<image001.jpg>
 


Disclaimer: This e-mail communication and any attachments may contain confidential and privileged information and is for use by the designated addressee(s) named above only. If you are not the intended addressee, you are hereby notified that you have received this communication in error and that any use or reproduction of this email or its contents is strictly prohibited and may be unlawful. If you have received this communication in error, please notify us immediately by replying to this message and deleting it from your computer. Thank you.

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100616/8d1d12a3/attachment.html>