[cisco-voip] 7.1(3)SU2 CCMService SNMP Trap Destination community string drop down empty

[Ryan Ratliff]

What did you set for access privileges did you set on the community string?  I didn't see one until I created one as  "Notify Only".  I assume a trap destination requires a notify enabled string.

-Ryan

On Jun 16, 2010, at 3:10 PM, Jason Aarons (US) wrote:

> CallManager 7.1(3)SU2 on MCS7835I3
>  
> CCMService > SNMP >v1v2 > Notification Destination > Add New
>  
> SNMP Notification Destination Configuration
>  
> Community String <Drop Down>  is empty
>  
> In Tools > Control Center - Features Services I’ve restarted Cisco CallManager SNMP Service but still don’t get anything under Notification Community String drop down, even though SNMP > v1/v2>  Community String shows the community string I entered. I even tried delete community string/restart SNMP/add string with the Create New Community String in the Notification Destination menu.
>  
>  
> <image001.jpg>
>  
> 
> 
> Disclaimer: This e-mail communication and any attachments may contain confidential and privileged information and is for use by the designated addressee(s) named above only. If you are not the intended addressee, you are hereby notified that you have received this communication in error and that any use or reproduction of this email or its contents is strictly prohibited and may be unlawful. If you have received this communication in error, please notify us immediately by replying to this message and deleting it from your computer. Thank you.
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100616/8f28ccef/attachment.html>