[cisco-voip] translation-rule on dialpeer for International calls to set plan=isnd type=international

[Ted Nugent]

Many ways to skin this cat....


voice translation-rule 2
 rule 1 // // type any international plan any isdn
!
voice translation-profile international
 translate called 2
!
dial-peer voice 2100 pots
 translation-profile outgoing international
 destination-pattern 9011T
 port 1/1:23
 prefix 011



On Mon, Jun 21, 2010 at 3:52 PM, Go0se <me at go0se.com> wrote:

>  You can get rid of your translations and simply use the “isdn map
> address” command to send the call out as plan/type unknown. It seems to work
> on the AT&T connections I’ve dealt with…
>
>
>
> !
>
> interface Serial0/0/0:23
>
>  no ip address
>
>  encapsulation hdlc
>
>  isdn switch-type primary-ni
>
>  isdn incoming-voice voice
>
>  isdn map address ^011* plan unknown type unknown
>
>  no cdp enable
>
> !
>
>
>
> Thanks,
>
>
>
> Go0se
>
>
>
> My blog:
>
> http://atc.go0se.com
>
>
>
> -------------------------------------
>
> Help Hopegivers International
>
> feed the orphans of India.
>
> http://www.hopegivers.org
>
> -------------------------------------
>
>
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Jason Aarons (US)
> *Sent:* Monday, June 21, 2010 1:52 PM
> *To:* cisco-voip (cisco-voip at puck.nether.net)
> *Subject:* [cisco-voip] translation-rule on dialpeer for International
> calls to set plan=isnd type=international
>
>
>
> Users dial 9,011+Number, AT&T doesn’t want to see 011 and this circuit has
> both US Long Distance and International dialing from Houston, TX. This would
> so much easier if they just took the 011 <grin> and I could set it at port
> level.
>
>
>
> At the dial-peer level I need to set the plan/type, but I know my rule
> below isn’t correct as we don’t pass 011 to provider just the Country
> Code+City+Number.
>
>
>
> voice translation-rule 101
>
> rule 1 /\(.*\)/ /011\1/ type international international
>
> !
>
> !
>
> !
>
> voice translation-profile setintl
>
> translate called 101
>
> !
>
> dial-peer voice 30 pots
>
> description International Dialing
>
> translation-profile outgoing setintl
>
> destination-pattern 9011T
>
> direct-inward-dial
>
> port 0/2/0:23
>  ------------------------------
>
> *Disclaimer: This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the designated
> addressee(s) named above only. If you are not the intended addressee, you
> are hereby notified that you have received this communication in error and
> that any use or reproduction of this email or its contents is strictly
> prohibited and may be unlawful. If you have received this communication in
> error, please notify us immediately by replying to this message and deleting
> it from your computer. Thank you. *
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100621/84d7abe9/attachment.html>