[cisco-voip] sending calls form a voip dialpeer to another dialpeer

Mac GroupStudy mac.groupstudy at gmail.com
Tue Jun 22 09:32:00 EDT 2010


Prior to CUBE there was a concept of an IP-IP Gateway. It and CUBE requires
something similar to this:
config)# voice service voip
# allow-connections h323 to h323


On Tue, Jun 22, 2010 at 8:41 AM, Dew Swen <dew.swen at gmail.com> wrote:

> Could anyone shed on some light about:
>
> "What is needed for sending calls from a voip dial-peer to voip dial-peer
> in a h323 gw?"
>
> AFAIK,
> - CUBE functions must be enabled
> - MTP must be configured on both CUCM and IOS
> - Have to do something in CUCM Gateway configuration??
>
> Any help or document will be appriciated.
>
> Kind regards,
>
> --
> Dew Swen
> CCVP, CCNP
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100622/b5941b10/attachment.html>


More information about the cisco-voip mailing list