[cisco-voip] sending calls form a voip dialpeer to another dialpeer

[Dew Swen]

Other than cube what is needed?

Regards,

--
Dew Swen
CCVP, CCNP




On 22.Haz.2010, at 16:32, Mac GroupStudy <mac.groupstudy at gmail.com>  
wrote:

> Prior to CUBE there was a concept of an IP-IP Gateway. It and CUBE  
> requires something similar to this:
> config)# voice service voip
> # allow-connections h323 to h323
>
>
> On Tue, Jun 22, 2010 at 8:41 AM, Dew Swen <dew.swen at gmail.com> wrote:
> Could anyone shed on some light about:
>
> "What is needed for sending calls from a voip dial-peer to voip dial- 
> peer in a h323 gw?"
>
> AFAIK,
> - CUBE functions must be enabled
> - MTP must be configured on both CUCM and IOS
> - Have to do something in CUCM Gateway configuration??
>
> Any help or document will be appriciated.
>
> Kind regards,
>
> -- 
> Dew Swen
> CCVP, CCNP
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100622/8c74e1d4/attachment.html>