[cisco-voip] Cisco Unity Connection 7 HA Setup

[Scott Irey]

UC HA is active/active, you do need equal ports on each server, the port
license doesn’t fail over. You will have a separate license for each UC
server.



As a side note, I have not been to happy with UC HA implementation. Seems
very buggy and has caused loss of service at least two times (still waiting
to confirm if the latest problem was HA/replication).



Scott Irey

Network & Telecom Systems Engineer

Oakland University

Office: 248.370.2808

Mobile: 248.505.9827



*From:* cisco-voip-bounces at puck.nether.net [mailto:
cisco-voip-bounces at puck.nether.net] *On Behalf Of *Cheng, Karen
*Sent:* Tuesday, June 22, 2010 10:02 AM
*To:* cisco-voip
*Subject:* [cisco-voip] Cisco Unity Connection 7 HA Setup



Hey guys,



Just wondering if anyone knows whether in a Cisco Unity Connection 7 high
availablilty setup I need to setup the same amount of ports on the
subscirber and the publisher? Or can I just have 140 ports on the publisher
and it'll failover automatically without anything configured on the
subscriber???



Regards



*Karen Cheng*

*Voice Network Engineer*






Join us at MotorFest on 11 July 2010 at Eagle Farm Racecourse. Visit
www.racq.com/motorfest for more information

Please Note: If you are not the intended recipient, please delete this email
as its use is prohibited. RACQ does not warrant or represent that this email
is free from viruses or defects. If you do not wish to receive any further
commercial electronic messages from RACQ please e-mail
unsubscribe at racq.com.au or contact RACQ on 13 19 05.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100622/e6617727/attachment.html>