[cisco-voip] 2851 Router DPNSS Configuration

[Mark Noble]

You will need a VG30D to convert DPNSS to Q.SIG

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/gatecont/ps9890/ps10448/data_sheet_c78-538819.html


-mark

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of James Dust
Sent: 05 March 2010 09:56
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] 2851 Router DPNSS Configuration


Morning All,

I am trying to use a Cisco 2821 router with VWIC2-1MFT-T1/E1 in conjunction with a BT featurenet service/circuit we have had installed at one of our sites.

I expected the provider to be delivering the service in the same way as a Q931 circuit, but have been told the configuration is DPNSS and my gateway needs to be configured as the ‘B end’ and ‘Y directional’

Can anyone shed any light on what I need to on my gateway configuration wise?

James

Consider the environment - Think before you print

The contents of this email are confidential to the intended recipient and may not be disclosed. Although it is believed that this email and any attachments are virus free, it is the responsibility of the recipient to confirm this.

You are advised that urgent, time-sensitive communications should not be sent by email. We hereby give you notice that a delivery receipt does not constitute acknowledgement or receipt by the intended recipient(s).

Details of Charles Stanley group companies and their regulators (where applicable), can be found at this URL http://www.charles-stanley.co.uk/contact-us/disclosure/
Notice: The information transmitted in this e-mail message and any attachments are solely for the intended recipient and may contain confidential or privileged information. If you are not the intended recipient, any review, transmission, dissemination or other use of this information is prohibited. If you have received this communication in error, please notify the sender immediately and delete the material from any computer, including any copies.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100305/cf75314d/attachment.html>