[cisco-voip] Unity / exchange

[Thomas LeMay]

I am curious if you have experienced any mwi issues while running unity
5.0.1 and Exchange 2007 SP2?  For example, when the exchange servers are
rebooted and the unity looses the synchronization do you experience MWI lamp
lights on without new messages?

 

Thank you,

 

Tom

 

  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Scott Voll
Sent: Friday, March 05, 2010 4:56 PM
To: Brantley Richbourg
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Unity / exchange

 

do you have any es's installed?  if so, which one?

 

Scott

On Fri, Mar 5, 2010 at 1:17 PM, Brantley Richbourg
<Brantley.Richbourg at mmicnc.com> wrote:

We are running Unity 5.0.1 with Exchange 2007 SP2 and have no issues.

 

  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jim Reed
Sent: Friday, March 05, 2010 3:03 PM
To: Scott Voll; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Unity / exchange

Scott,
We have been running Unity 5.0.1 and Exchange 2007 SP2 for quite some time
now.  Not sure if Cisco "officially" supports it or not but that's where
we're at and we have not seen any issues that I'm aware of.  That's why we
went to Unity 5.x so we could get to Exchange 2k7 and we just went to SP2 on
Exchange as part of the whole install process.
-- 
Jim Reed
Swift Communications, Inc.
970-243-2200 Ext. 12301
775-772-7666 (Cell)



On 3/5/10 12:41 PM, "Scott Voll" <svoll.voip at gmail.com> wrote:

I'm running Unity 5.0.1 and Exchange 2007 SP1 back end UM.  

I'm not finding in the docs on Cisco.com if exchange 2007 SP2 is supported
and if there is anything I need to do on Unity to support it.  I guess I'm
just not looking in the right place.  Anyone know where on Cisco.com I
should find it?  I was looking under unity 5 install / upgrade guides.

Since SP 2 was released in August, I'm assuming it's supported, but not sure
if any ES's go with it.

Thanks for any help.

Scott

 

Confidentiality: The information in this electronic mail may contain
confidential, sensitive and/or protected health information intended only
for the addressee(s). Any other person, including anyone who believes he/she
might have received it due to an addressing error, is requested to notify
this sender immediately by return e-mail, and shall delete it without
further reading and retention. The information shall not be forwarded or
shared unless in compliance with MMIC policies on confidentiality, and/or
the written permission of this sender. 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100305/d25e23b8/attachment.html>