[cisco-voip] Unity / exchange

[Mike Thompson]

Any version I've installed, if exchange is booted, I always boot  
unity.  The back end exchange gets really crabby and the reboot fixes  
it.  It's a 'big hammer' approach, but it's the most effective way to  
fix it.

Sent from my phone, apologies for any typos.

On Mar 5, 2010, at 9:16 PM, "Thomas LeMay" <thomaslemay at comcast.net>  
wrote:

> I am curious if you have experienced any mwi issues while running  
> unity 5.0.1 and Exchange 2007 SP2?  For example, when the exchange  
> servers are rebooted and the unity looses the synchronization do you  
> experience MWI lamp lights on without new messages?
>
>
>
> Thank you,
>
>
>
> Tom
>
>
>
> From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip- 
> bounces at puck.nether.net] On Behalf Of Scott Voll
> Sent: Friday, March 05, 2010 4:56 PM
> To: Brantley Richbourg
> Cc: cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] Unity / exchange
>
>
>
> do you have any es's installed?  if so, which one?
>
>
>
> Scott
>
> On Fri, Mar 5, 2010 at 1:17 PM, Brantley Richbourg <Brantley.Richbourg at mmicnc.com 
> > wrote:
>
> We are running Unity 5.0.1 with Exchange 2007 SP2 and have no issues.
>
>
>
> From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip- 
> bounces at puck.nether.net] On Behalf Of Jim Reed
> Sent: Friday, March 05, 2010 3:03 PM
> To: Scott Voll; cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] Unity / exchange
>
> Scott,
> We have been running Unity 5.0.1 and Exchange 2007 SP2 for quite  
> some time now.  Not sure if Cisco “officially” supports it or not  
> but that’s where we’re at and we have not seen any issues that  
> I’m aware of.  That’s why we went to Unity 5.x so we could get to  
> Exchange 2k7 and we just went to SP2 on Exchange as part of the whol 
> e install process.
> -- 
> Jim Reed
> Swift Communications, Inc.
> 970-243-2200 Ext. 12301
> 775-772-7666 (Cell)
>
>
>
> On 3/5/10 12:41 PM, "Scott Voll" <svoll.voip at gmail.com> wrote:
>
> I'm running Unity 5.0.1 and Exchange 2007 SP1 back end UM.
>
> I'm not finding in the docs on Cisco.com if exchange 2007 SP2 is  
> supported and if there is anything I need to do on Unity to support  
> it.  I guess I'm just not looking in the right place.  Anyone know  
> where on Cisco.com I should find it?  I was looking under unity 5  
> install / upgrade guides.
>
> Since SP 2 was released in August, I'm assuming it's supported, but  
> not sure if any ES's go with it.
>
> Thanks for any help.
>
> Scott
>
>
>
> Confidentiality: The information in this electronic mail may contain  
> confidential, sensitive and/or protected health information intended  
> only for the addressee(s). Any other person, including anyone who  
> believes he/she might have received it due to an addressing error,  
> is requested to notify this sender immediately by return e-mail, and  
> shall delete it without further reading and retention. The  
> information shall not be forwarded or shared unless in compliance  
> with MMIC policies on confidentiality, and/or the written permission  
> of this sender.
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100306/f42f7f1e/attachment.html>