[cisco-voip] Unity / exchange

[Brantley Richbourg]

@ Scott - Not that I am aware of.  We had a VAR install Unity.

@ Tom - I have not seen that issue in my environment.  I've had some random MWI issues before, but I went into the Tools Depot, Telephone Integration Manager and resynchronized MWI from there.  That seems fix any MWI problems I've had in the past, but things have been very stable for Unity & Exchange 2007 (knock on wood).

________________________________
From: Thomas LeMay [mailto:thomaslemay at comcast.net]
Sent: Friday, March 05, 2010 9:17 PM
To: 'Scott Voll'; Brantley Richbourg
Cc: cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Unity / exchange

I am curious if you have experienced any mwi issues while running unity 5.0.1 and Exchange 2007 SP2?  For example, when the exchange servers are rebooted and the unity looses the synchronization do you experience MWI lamp lights on without new messages?

Thank you,

Tom

________________________________
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Scott Voll
Sent: Friday, March 05, 2010 4:56 PM
To: Brantley Richbourg
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Unity / exchange

do you have any es's installed?  if so, which one?

Scott
On Fri, Mar 5, 2010 at 1:17 PM, Brantley Richbourg <Brantley.Richbourg at mmicnc.com<mailto:Brantley.Richbourg at mmicnc.com>> wrote:
We are running Unity 5.0.1 with Exchange 2007 SP2 and have no issues.

________________________________
From: cisco-voip-bounces at puck.nether.net<mailto:cisco-voip-bounces at puck.nether.net> [mailto:cisco-voip-bounces at puck.nether.net<mailto:cisco-voip-bounces at puck.nether.net>] On Behalf Of Jim Reed
Sent: Friday, March 05, 2010 3:03 PM
To: Scott Voll; cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Subject: Re: [cisco-voip] Unity / exchange
Scott,
We have been running Unity 5.0.1 and Exchange 2007 SP2 for quite some time now.  Not sure if Cisco "officially" supports it or not but that's where we're at and we have not seen any issues that I'm aware of.  That's why we went to Unity 5.x so we could get to Exchange 2k7 and we just went to SP2 on Exchange as part of the whole install process.
--
Jim Reed
Swift Communications, Inc.
970-243-2200 Ext. 12301
775-772-7666 (Cell)



On 3/5/10 12:41 PM, "Scott Voll" <svoll.voip at gmail.com<mailto:svoll.voip at gmail.com>> wrote:
I'm running Unity 5.0.1 and Exchange 2007 SP1 back end UM.

I'm not finding in the docs on Cisco.com if exchange 2007 SP2 is supported and if there is anything I need to do on Unity to support it.  I guess I'm just not looking in the right place.  Anyone know where on Cisco.com I should find it?  I was looking under unity 5 install / upgrade guides.

Since SP 2 was released in August, I'm assuming it's supported, but not sure if any ES's go with it.

Thanks for any help.

Scott


Confidentiality: The information in this electronic mail may contain confidential, sensitive and/or protected health information intended only for the addressee(s). Any other person, including anyone who believes he/she might have received it due to an addressing error, is requested to notify this sender immediately by return e-mail, and shall delete it without further reading and retention. The information shall not be forwarded or shared unless in compliance with MMIC policies on confidentiality, and/or the written permission of this sender.


</PRE><P>Confidentiality: The information in this electronic mail may contain confidential, sensitive and/or protected health information intended only for the addressee(s).  Any other person, including anyone who believes he/she might have received it due to an addressing error, is requested to notify this sender immediately by return e-mail, and shall delete it without further reading and retention.  The information shall not be forwarded or shared unless in compliance with MMIC policies on confidentiality, and/or the written permission of this sender.
</P>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100306/b6bbe1c5/attachment.html>