[cisco-voip] maximum call duration just for PSTN

[Dennis Heim]

For that level of control and granularity, you are probably looking at the 3 party call accounting software .

Dennis Heim
Network Voice Engineer
CDW  Advanced Technology Services
11711 N. Meridian Street, Suite 225
Carmel, IN  46032

317.569.4255 Office
317.569.4201 Fax
317.694.6070 Cell
dennis.heim at cdw.com<mailto:dennis.heim at cdw.com>
www.berbee.com<http://www.berbee.com/>

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Arnold Lesar
Sent: Friday, March 05, 2010 9:15 PM
To: Matthew Saskin; VoIPgroup
Subject: [cisco-voip] maximum call duration just for PSTN

dear matthew,

thank's for your answer and for your help.
now i can find max call duration, but it is for all call, what if i just want to set max call duration just for outgoing calls to PSTN only? and setting only special user like director doesn't have maximum call duration?

Regards,
Arnold Samuel Lesar

------------------------------------------------------
Note: This message was created by ARNOLD SAMUEL LESAR.
------------------------------------------------------

--------------------------------------------------------------------------
--------------------------------------------------------------------------
PT. PELITA RELIANCE INTERNATIONAL
Eka Hospital BSD City, Tangerang
Address : CBD Lot IX, BSD City, Tangerang
Phone : (+62-21) 256 555 55
Fax : (+62-21) 256 555 44
--------------------------------------------------------------------------
--------------------------------------------------------------------------


________________________________
From: Matthew Saskin <msaskin at gmail.com>
To: Arnold Lesar <arnoldlesar at yahoo.co.uk>
Sent: Fri, 5 March, 2010 20:51:06
Subject: Re: [cisco-voip] create automatic disconnected


Arnold -

The following link should assist you in how to change service parameters:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/7_0_1/ccmcfg/b02svprm.html#wpxref88354

The service parameter you want, as I recall, is labeled "Maximum Call Timer" and is a parameter of the "CallManager" service.

Matthew Saskin
msaskin at gmail.com<mailto:msaskin at gmail.com>
203-253-9571

July 18, 2010 - 1500m swim (in the hudson), 40k bike, 10k run
Please support the Leukemia & Lyphoma Society
http://pages.teamintraining.org/nyc/nyctri10/msaskin

On Thu, Mar 4, 2010 at 10:57 PM, Arnold Lesar <arnoldlesar at yahoo.co.uk<mailto:arnoldlesar at yahoo.co.uk>> wrote:
dear mr matthew,

where can i find that service parameter for the maximum call length

GBU

Regards,

Arnold Samuel Lesar

------------------------------------------------------
Note: This message was created by ARNOLD SAMUEL LESAR.
------------------------------------------------------

--------------------------------------------------------------------------
--------------------------------------------------------------------------
PT. PELITA RELIANCE INTERNATIONAL
Eka Hospital BSD City, Tangerang
Address : CBD Lot IX, BSD City, Tangerang
Phone : (+62-21) 256 555 55
Fax : (+62-21) 256 555 44
--------------------------------------------------------------------------
--------------------------------------------------------------------------


________________________________
From: Matthew Saskin <msaskin at gmail.com<mailto:msaskin at gmail.com>>
To: Arnold Lesar <arnoldlesar at yahoo.co.uk<mailto:arnoldlesar at yahoo.co.uk>>
Cc: VoIPgroup <cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>>
Sent: Thu, 4 March, 2010 20:28:26
Subject: Re: [cisco-voip] create automatic disconnected

Arnold -

Your only option is a service parameter for the maximum call length, which will disconnect calls after a certain period of time.  It's not granular, so it's an all or nothing setting.  I believe the default is either 8 or 12 hours, but is configurable in number of minutes.

Matthew Saskin
msaskin at gmail.com<mailto:msaskin at gmail.com>
203-253-9571

July 18, 2010 - 1500m swim (in the hudson), 40k bike, 10k run
Please support the Leukemia & Lyphoma Society
http://pages.teamintraining.org/nyc/nyctri10/msaskin

On Wed, Mar 3, 2010 at 10:22 PM, Arnold Lesar <arnoldlesar at yahoo.co.uk<mailto:arnoldlesar at yahoo.co.uk>> wrote:
Dear all,

how to create automatic disconnect in ccm 4.0?
for example :
the user can call for only 15 minutes after that the phone disconnected.

Regards,
Arnold Samuel Lesar

------------------------------------------------------
Note: This message was created by ARNOLD SAMUEL LESAR.
------------------------------------------------------

--------------------------------------------------------------------------
--------------------------------------------------------------------------
PT. PELITA RELIANCE INTERNATIONAL
Eka Hospital BSD City, Tangerang
Address : CBD Lot IX, BSD City, Tangerang
Phone : (+62-21) 256 555 55
Fax : (+62-21) 256 555 44
--------------------------------------------------------------------------
--------------------------------------------------------------------------



_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
htArntps://puck.nether.net/mailman/listinfo/cisco-voip<https://puck.nether.net/mailman/listinfo/cisco-voip>





-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100306/6d5bb5ad/attachment.html>