[cisco-voip] maximum call duration just for PSTN

Andrius Kislas andrius-conf at kislas.lt
Sun Mar 7 07:36:03 EST 2010


Technically this could be a CTI application that uses (J)TAPI and
watches those IP phones and directions that you want to control. After
some time it could force to drop a call.
The question is still there of writing or finding such application.

Andrius

On 2010.03.06 04:14, Arnold Lesar wrote:
> dear matthew,
> 
> thank's for your answer and for your help.
> now i can find max call duration, but it is for all call, what if i just
> want to set max call duration just for outgoing calls to PSTN only? and
> setting only special user like director doesn't have maximum call duration?
>  
> Regards,
> 
> Arnold Samuel Lesar
> 
> 
> ------------------------------------------------------
> Note: This message was created by ARNOLD SAMUEL LESAR.
> ------------------------------------------------------
> 
> 
> --------------------------------------------------------------------------
> --------------------------------------------------------------------------
> PT. PELITA RELIANCE INTERNATIONAL
> Eka Hospital BSD City, Tangerang
> Address : CBD Lot IX, BSD City, Tangerang
> Phone : (+62-21) 256 555 55
> Fax : (+62-21) 256 555 44
> --------------------------------------------------------------------------
> --------------------------------------------------------------------------
> 
> 
> ------------------------------------------------------------------------
> *From:* Matthew Saskin <msaskin at gmail.com>
> *To:* Arnold Lesar <arnoldlesar at yahoo.co.uk>
> *Sent:* Fri, 5 March, 2010 20:51:06
> *Subject:* Re: [cisco-voip] create automatic disconnected
> 
> Arnold -
>  
> The following link should assist you in how to change service parameters:
> http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/7_0_1/ccmcfg/b02svprm.html#wpxref88354
>  
> The service parameter you want, as I recall, is labeled "Maximum Call
> Timer" and is a parameter of the "CallManager" service.
> 
> Matthew Saskin
> msaskin at gmail.com <mailto:msaskin at gmail.com>
> 203-253-9571
> 
> July 18, 2010 - 1500m swim (in the hudson), 40k bike, 10k run
> Please support the Leukemia & Lyphoma Society
> http://pages.teamintraining.org/nyc/nyctri10/msaskin
> 
> 
> On Thu, Mar 4, 2010 at 10:57 PM, Arnold Lesar <arnoldlesar at yahoo.co.uk
> <mailto:arnoldlesar at yahoo.co.uk>> wrote:
> 
>     dear mr matthew,
> 
>     where can i find that service parameter for the maximum call length
>      
>     GBU
> 
> 
>     Regards,
> 
> 
>     Arnold Samuel Lesar
> 
> 
>     ------------------------------------------------------
>     Note: This message was created by ARNOLD SAMUEL LESAR.
>     ------------------------------------------------------
> 
> 
>     --------------------------------------------------------------------------
>     --------------------------------------------------------------------------
>     PT. PELITA RELIANCE INTERNATIONAL
>     Eka Hospital BSD City, Tangerang
>     Address : CBD Lot IX, BSD City, Tangerang
>     Phone : (+62-21) 256 555 55
>     Fax : (+62-21) 256 555 44
>     --------------------------------------------------------------------------
>     --------------------------------------------------------------------------
> 
> 
> 
>     ------------------------------------------------------------------------
>     *From:* Matthew Saskin <msaskin at gmail.com <mailto:msaskin at gmail.com>>
>     *To:* Arnold Lesar <arnoldlesar at yahoo.co.uk
>     <mailto:arnoldlesar at yahoo.co.uk>>
>     *Cc:* VoIPgroup <cisco-voip at puck.nether.net
>     <mailto:cisco-voip at puck.nether.net>>
>     *Sent:* Thu, 4 March, 2010 20:28:26
>     *Subject:* Re: [cisco-voip] create automatic disconnected
> 
>     Arnold -
>      
>     Your only option is a service parameter for the maximum call length,
>     which will disconnect calls after a certain period of time.  It's
>     not granular, so it's an all or nothing setting.  I believe the
>     default is either 8 or 12 hours, but is configurable in number of
>     minutes.
> 
>     Matthew Saskin
>     msaskin at gmail.com <mailto:msaskin at gmail.com>
>     203-253-9571
> 
>     July 18, 2010 - 1500m swim (in the hudson), 40k bike, 10k run
>     Please support the Leukemia & Lyphoma Society
>     http://pages.teamintraining.org/nyc/nyctri10/msaskin
> 
> 
>     On Wed, Mar 3, 2010 at 10:22 PM, Arnold Lesar
>     <arnoldlesar at yahoo.co.uk <mailto:arnoldlesar at yahoo.co.uk>> wrote:
> 
>         Dear all,
> 
>         how to create automatic disconnect in ccm 4.0?
>         for example :
>         the user can call for only 15 minutes after that the
>         phone disconnected.
> 
>         Regards,
> 
>         Arnold Samuel Lesar
> 
> 
>         ------------------------------------------------------
>         Note: This message was created by ARNOLD SAMUEL LESAR.
>         ------------------------------------------------------
> 
> 
>         --------------------------------------------------------------------------
>         --------------------------------------------------------------------------
>         PT. PELITA RELIANCE INTERNATIONAL
>         Eka Hospital BSD City, Tangerang
>         Address : CBD Lot IX, BSD City, Tangerang
>         Phone : (+62-21) 256 555 55
>         Fax : (+62-21) 256 555 44
>         --------------------------------------------------------------------------
>         --------------------------------------------------------------------------
> 
> 
> 
> 
>         _______________________________________________
>         cisco-voip mailing list
>         cisco-voip at puck.nether.net <mailto:cisco-voip at puck.nether.net>
>         htArntps://puck.nether.net/mailman/listinfo/cisco-voip
>         <https://puck.nether.net/mailman/listinfo/cisco-voip>
> 
> 
> 
> 
> 
> 
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip



More information about the cisco-voip mailing list