[cisco-voip] Cisco Call Manager E&M

[Jim McBurnett]

If all you want is just that E&M on H.323—
Just make dial-peers for it alone..

I have seen that done….

A dual-role Gateway.

Jim

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Leslie Meade
Sent: Monday, March 08, 2010 12:23 PM
To: Martin Bufton
Cc: cisco-voip voyp list
Subject: Re: [cisco-voip] Cisco Call Manager E&M

I gather you have a MGCP gateway ☺
I had the  same issue, I converted to a H.323 and created dials peers to it and it works fine.

Leslie



From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Martin Bufton
Sent: Monday, March 08, 2010 8:43 AM
Cc: cisco-voip voyp list
Subject: [cisco-voip] Cisco Call Manager E&M

Have a central site that is running Call Manager 7

I have a branch office with a 2811, running SRST.

I would like to use the E&M port on the 2811, to interface with an intercom system.

How do I go about getting Call Manager to see the E&M module?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100308/535ff5f1/attachment.html>