[cisco-voip] 3845 GW DSP profile registration

[george.hendrix at l-3com.com]

Hi everyone,

 

  I have a voice gateway (3845 12.4(24)T2) with a DSP farm and a SIP
trunk to the PSTN, running h.323 to CUCM 6.1.  The system was installed
with the entries for the ccm servers stating version 3.1 or greater.  In
order to add the mtp profile, I need to change that entry to 4.1 or
greater to get the mtp up that I am trying to add.  However, when I
changed it to 4.1 or greater (or even 6.0 or greater), the conference
and transcoder profiles won't register, but the mtp does.  Of course,
once I change it back to 3.1, the mtp won't register.  Is it simply
possible, that I just need to delete and re-add the conferencing and
transcoding in CCM ?

 

Bill Hendrix

 

george.hendrix at l-3com.com <mailto:george.hendrix at l-3com.com> 

W: 813-281-3109  C: 813-205-0979

STRATIS Service Desk: 1-800-871-9983 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100309/5b440004/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 5644 bytes
Desc: image001.jpg
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100309/5b440004/attachment.jpe>