[cisco-voip] 3845 GW DSP profile registration

[george.hendrix at l-3com.com]

Thanks Peter, that was it..the transcoder and conference bridge were not
inserted as enhanced.

 

Bill Hendrix

 

george.hendrix at l-3com.com

W: 813-281-3109  C: 813-205-0979

STRATIS Service Desk: 1-800-871-9983 

 

From: Peter Slow [mailto:peter.slow at gmail.com] 
Sent: Tuesday, March 09, 2010 9:46 AM
To: Hendrix, George (Bill) @ STRATIS
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] 3845 GW DSP profile registration

 

Bill, 
   It sounds like you've doen one of two things:

A. forgotten to put the "version" argument at the end of your  "sccp ccm
x.x.x.x ident y" statement

example:
R1(config)#sccp ccm x.x.x.x identifier 1 version ?
  3.0    Select CCM 3.0 version or above
  3.1    Select CCM 3.1 version or above
  3.2    Select CCM 3.2 version or above
  3.3    Select CCM 3.3 version or above
  4.0    Select CCM 4.0 version or above
  4.1    Select CCM 4.1 version or above
  5.0.1  Select CCM 5.0.1 version or above
  6.0    Select CCM 6.0 version or above
  7.0+   Select CCM 7.0 version or above

Or B. incorrectly specified your transcoder as an IOS device instead of
an "Enhanced IOS" device from within the ccm administration pages.
Actually, readign your description more closely, it sounds like you've
done B. Can you please check the device type you've added in CUCM? they
should have "Enhanced" in their device types. (IF they dont, then yes,
you need to delete and re-add them as the correct type.)

-Peter



On Tue, Mar 9, 2010 at 8:05 AM, <george.hendrix at l-3com.com> wrote:

Hi everyone,

 

  I have a voice gateway (3845 12.4(24)T2) with a DSP farm and a SIP
trunk to the PSTN, running h.323 to CUCM 6.1.  The system was installed
with the entries for the ccm servers stating version 3.1 or greater.  In
order to add the mtp profile, I need to change that entry to 4.1 or
greater to get the mtp up that I am trying to add.  However, when I
changed it to 4.1 or greater (or even 6.0 or greater), the conference
and transcoder profiles won't register, but the mtp does.  Of course,
once I change it back to 3.1, the mtp won't register.  Is it simply
possible, that I just need to delete and re-add the conferencing and
transcoding in CCM ?

 

Bill Hendrix



george.hendrix at l-3com.com

W: 813-281-3109  C: 813-205-0979

STRATIS Service Desk: 1-800-871-9983 

 


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100309/aa38cced/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 5644 bytes
Desc: image001.jpg
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100309/aa38cced/attachment.jpe>