[cisco-voip] H.323 Gateway (Cisco) and Plan Type

[Matthew Ballard]

Here¹s all of the pots dial peers:
dial-peer voice 1 pots
 call-block translation-profile incoming call_block
 call-block disconnect-cause incoming call-reject
 destination-pattern 9[2-9]......
 direct-inward-dial
 port 0/0/0:23
 prefix 1310
!
dial-peer voice 2 pots
 destination-pattern 9T
 direct-inward-dial
 port 0/0/0:23
!        
dial-peer voice 3 pots
 call-block translation-profile incoming call_block
 call-block disconnect-cause incoming call-reject
 destination-pattern 9[2-9]......
 direct-inward-dial
 port 0/0/1:23
 prefix 1310
!
dial-peer voice 4 pots
 destination-pattern 9T
 direct-inward-dial
 port 0/0/1:23
!

Matthew


On 3/10/10 3:37 PM, "Cristobal Priego" <cristobalpriego at gmail.com> wrote:

> could you show your H.323 dial-peer for international calls
> 
> 2010/3/10 Matthew Ballard <mballard at otis.edu>
>> I had included that in the subject line, it is a H.323 gateway.
>> 
>> Matthew
>> 
>> 
>> 
>> 
>> On 3/10/10 3:32 PM, "Cristobal Priego" <cristobalpriego at gmail.com
>> <http://cristobalpriego@gmail.com> > wrote:
>> 
>>> is your gateway configured as a MGCP or H.323 gateway ?
>>> 
>>> 2010/3/10 Matthew Ballard <mballard at otis.edu <http://mballard@otis.edu> >
>>>> I ran into a problem with our telephony provider that has been discovered
>>>> as
>>>> of yesterday.  Our system is sending out a Type of International (see
>>>> below)
>>>> when it is connecting a call that begins with 011.  After opening a ticket
>>>> with our provider when trying to call international (at least some of the
>>>> time), there is a problem with sending the 011 and sending the type
>>>> international.  I'm not sure in IOS how to either strip the 011 or change
>>>> the Type being sent (someone else did the initial setup of the gateway).
>>>> Can someone point me in the right direction?
>>>> 
>>>> Thank You,
>>>> Matthew Ballard
>>>> Network Manager
>>>> Otis College of Art and Design
>>>> mballard at otis.edu <http://mballard@otis.edu>
>>>> 
>>>> .Mar 10 14:15:11.540 PST: ISDN Se0/0/0:23 Q931: pak_private_number: Invalid
>>>> type/plan 0x0 0x0 may be overriden; sw-type 13
>>>> .Mar 10 14:15:11.540 PST: ISDN Se0/0/0:23 Q931: pak_private_number: Invalid
>>>> type/plan 0x0 0x0 may be overriden; sw-type 13
>>>> .Mar 10 14:15:11.540 PST: ISDN Se0/0/0:23 Q931: Applying typeplan for
>>>> sw-type 0xD is 0x1 0x1, Called num 011442075147212
>>>> .Mar 10 14:15:11.544 PST: ISDN Se0/0/0:23 Q931: TX -> SETUP pd = 8  callref
>>>> = 0x6D92
>>>>         Bearer Capability i = 0x8090A2
>>>>                 Standard = CCITT
>>>>                 Transfer Capability = Speech
>>>>                 Transfer Mode = Circuit
>>>>                 Transfer Rate = 64 kbit/s
>>>>         Channel ID i = 0xA98397
>>>>                 Exclusive, Channel 23
>>>>         Calling Party Number i = 0x2181, '3106656929'
>>>>                 Plan:ISDN, Type:National
>>>>         Called Party Number i = 0x91, '011442075147212'
>>>>                 Plan:ISDN, Type:International
>>>> 
>>>> _______________________________________________
>>>> cisco-voip mailing list
>>>> cisco-voip at puck.nether.net <http://cisco-voip@puck.nether.net>
>>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>> 
>>> 
> 
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100310/801ae1e1/attachment.html>