[cisco-voip] International Calling Weirdness

[Scott Voll]

Look at your plan type with Qwest.

here in Oregon they want you to strip the 011 and add the type
international.

that usually ends up being my problem.  if that is set corrrectly(check with
debug isdn q931) then open a ticket with the telco.  most likely it will be
on there side.

Scott

On Thu, Mar 11, 2010 at 3:36 PM, Jim Reed <jreed at swiftnews.com> wrote:

> Call Manager 4.x
>
> I can call an international number in Denmark from location A.
>
> When I try to call that same number from location B, I get the following
> recording -- "We're sorry your call cannot be completed as dialed.  Please
> check the number and dial again.  G2"
>
> When I try to call that same number from location C, I get a fast busy.
>
> The delay between either completion of the call or the two aforementioned
> errors is about the same.
>
> I have checked the configuration of Partitions, Calling Search Spaces and
> Route Patterns at all three locations.  They are an exact match.
>
> I have checked the router configurations at all three locations.  They are
> an exact match.  All H323.
>
> One bit of weirdness I see at location C when I do a "show call history
> voice brief" is three call legs for each call to the international number
> --
> instead of the customary two.  It also shows an error of (invalid number
> (28)) at location C.
>
> Anyone got any good ideas where to try to start troubleshooting this thing
> further.  Please don't hesitate to let me know what detail I left out.
> --
> Jim Reed
> Swift Communications, Inc.
> 970-243-2200 Ext. 12301
> 775-772-7666 (Cell)
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100312/b784e33d/attachment.html>