[cisco-voip] ether switch modules on 3900 not coming on line

[Ted Nugent]

Give this a shot?

Using the *boot manual* global configuration command, the module can be
booted separately from the router


On Fri, Mar 12, 2010 at 10:49 AM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:

> OK, I'm sure I'm missing something simple, but when I boot my 3945 I get
> the following error:
>
> ilpm_fault-5-ilpm_warning: ether switch network modules with poe support
> need to be reloaded to function properly
>
> I have no idea how to reload this thing. And reloading the router doesn't
> help.
>
> I'm hunting down for some documentation (go figure) as a starting point,
> but just thought someone might have gone down this path before.
>
>
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Cooking with unix is easy. You just sed it and forget it.
>                               - LFJ (with apologies to Mr. Popeil)
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100312/5bde3619/attachment.html>