[cisco-voip] International Calling Weirdness

[Jim Reed]

Could I impose upon someone to give me an example of how to set up a translation rule that takes any number that matches the dial peer associated with that translation rule, leaves the number as is and just changes the calling type to international.  As long as the number uses that particular dial peer, I don't care how long it is, I just want to reset the calling type to international.

Very, Very, Very Much Appreciated.

Thank You...
--
Jim Reed
Swift Communications, Inc.
970-243-2200 Ext. 12301
775-772-7666 (Cell)



On 3/15/10 12:52 PM, "Jim Reed" <jreed at swiftnews.com> wrote:

I guess what I should be asking is if there is another way - other than numbering type - to send an indication of plan type international to the telco?  Or is that supposed to be the function of the numbering-type config command?

Thank You...


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100315/aa2a0a6b/attachment.html>