[cisco-voip] Mixing PVDM types in a 2811

[zohaib shabir]

Yes,
It is possible, i have read somewhere in documentation last week, when i
searched for PVDM3 in ISRG2.

Regards,
Zohaib Shabir
Network Specialist- Voice
DWP Group, TECH Division Karachi
Ph:+92-302-8232689

On Tue, Mar 16, 2010 at 8:22 PM, Mark Holloway <mh at markholloway.com> wrote:

> Is it possible to populate a 2811 with PVDM2 modules as well as an NM-HDV
> with PVDM-12 modules and utilize both sets of DSP's?  For example, configure
> all the PVDM2's for transcoding and the PVDM-12's for conferencing.
>
> Thanks,
> Mark
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>



--
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100316/bad25930/attachment.html>