[cisco-voip] Mixing PVDM types in a 2811

[Peter Slow]

Zohaib,
   NM-HDV uses the original PVDM. the question was in regards to PVDMs
and PVDMIIs.  There is no PVDM3 at _all_ in a 2800 series router.

-Peter

On Tue, Mar 16, 2010 at 12:45 PM, zohaib shabir <zohaibshabir at gmail.com> wrote:
> Yes,
> It is possible, i have read somewhere in documentation last week, when i
> searched for PVDM3 in ISRG2.
>
> Regards,
> Zohaib Shabir
> Network Specialist- Voice
> DWP Group, TECH Division Karachi
> Ph:+92-302-8232689
>
> On Tue, Mar 16, 2010 at 8:22 PM, Mark Holloway <mh at markholloway.com> wrote:
>>
>> Is it possible to populate a 2811 with PVDM2 modules as well as an NM-HDV
>> with PVDM-12 modules and utilize both sets of DSP's?  For example, configure
>> all the PVDM2's for transcoding and the PVDM-12's for conferencing.
>>
>> Thanks,
>> Mark
>>
>>
>>
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
> --
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>