[cisco-voip] CM upgrade path

[Ryan Ratliff]

If you try to do the upgrade via SFTP and it doesn't see the file, then yes you need to apply the patch.  It should be in the cisco.com downloads for 5.1.

-Ryan

On Mar 18, 2010, at 6:50 PM, Scott Voll wrote:

Do I understand correctly that I need to upgrade to a different version of 5.1.3 before I upgrade to 7.1.3b?  I'm not going to a 7.0 verision. (per bug)

Scott

On Wed, Mar 17, 2010 at 11:27 AM, Ryan Ratliff <rratliff at cisco.com> wrote:
It's not a problem with the file you are upgrading to, but rather the version you are on not being able to see the file on the sftp server.  The "fix" needs to be in the version you are upgrading *from*.

-Ryan

On Mar 17, 2010, at 2:20 PM, Scott Voll wrote:

I should not run into the bug you quoted below because I'm going to a 7.1.3b rather then a 7.0, correct?  I see fixes in 7.0 releases, so i'm ASS - U (&) ME ing it's fixed in 7.1.3b.

Scott

On Wed, Mar 17, 2010 at 10:53 AM, Ryan Ratliff <rratliff at cisco.com> wrote:
The big issue is that the 7.1(3b)su2 upgrade file on cisco.com is the UCSInstall_UCOS file that is only accepted by 6.x upgrades (this particular patch is also restricted to 6.1.3 and later).  A 5.x to 7.x upgrade requires the UCM-Upgrade file which doesn't exist for 7.1(3)su2.

If you are upgrading to get a particular bug fix you can open a TAC SR to request the UCM-Upgrade file for the 7.1(3)ES, but keep in mind you still have to order the upgrade via PUT to get your sw feature license PAK (which you've already done).    You may also need a separate patch depending on what version of 5.1(3) you are on (CSCsl21150).

-Ryan

On Mar 17, 2010, at 1:41 PM, Scott Voll wrote:

thanks Ryan..... as I thought.  Two step upgrade.



On Wed, Mar 17, 2010 at 10:30 AM, Ryan Ratliff <rratliff at cisco.com> wrote:
That's during initial install.  For an actual upgrade the same option doesn't exist.

-Ryan

On Mar 17, 2010, at 1:25 PM, Steve Sarrick wrote:

I have not tried this specific path, but during the upgrade you are asked if you have a service pack that you would like to apply and can be prompted for the media, its not a slipstream per se, but same results.
 
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Scott Voll
Sent: Wednesday, March 17, 2010 1:05 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] CM upgrade path
 
So looking at http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html#w
p40074 I see that I can upgrade from 5.1.3 to 7.1.3b (which is the media I have).  But can not upgrade directly to 7.1.(3b)su2.
 
so my question is do I have to upgrade to 7.1.3b then turn around and upgrade to su2 or can I slip stream it in the upgrade process?  I'm assuming not.  but I wanted to check with you all before I did it.
 
thanks
 
Scott
_______________________________________________
cisco-voip mailing list

cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip







-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100319/be775346/attachment.html>