[cisco-voip] 7940 Power Save Mode

Fuermann, Jason JBF005 at shsu.edu
Tue Mar 23 18:30:30 EDT 2010


1. I believe Wes has many test phones attached to his test switch (probably around 8). Turn all those off = 100w, and multiply that by 15 engineers with the same setup.

2. For the phone to receive or make calls (at least in a timely manner) it would have to stay on, and functional. Otherwise, you would have to wait for it to boot and register.

3. The key is not to turn off ALL the phones.

-----Original Message-----
From: Lawrence E. Bakst [mailto:ml at iridescent.org] 
Sent: Tuesday, March 23, 2010 5:32 PM
To: Wes Sisk; Fuermann, Jason
Cc: cisco-voip at puck.nether.net; Jamie Weatherhead
Subject: Re: [cisco-voip] 7940 Power Save Mode

1. Sorry I am confused about your 15 x 100W comment. I don't see how turning off 15 phones is like "turning off 15x100w bulbs for 12 hours at a time". Which phones are you talking about? You aren't saying the phones take 100W per port are you? That is more than the 802.3ad POE max of 15.4/12.95 W per port. You must mean per switch?

2. In an idea world Cisco phones would have a hardware architecture were most of the phone can go to sleep and just the Ethernet chip and it's associated circuitry (POE, on-hook-switch, Display button, ...) can be powered and in POE power class 1. The phones watches for a Wake-on-LAN Ethernet packet, off hook, or Display Button depress event which then powers up the rest of the phone and it moves up to POE class 2,3 or 4 if it needs to. I don't see any reason why this couldn't work for incoming calls as well. This technology (Ethernet chips with Wake-on-LAN) has been around for a long time. I wish all Cisco phones worked this way.

3. I would also like to point out that while powering off phones does indeed save power, there are people that work outside normal hours and if their were to be a medical emergency and all the phones are turned off at the switchport that could be a bad thing for everyone involved.

leb


At 4:47 PM -0400 3/23/10, Wes Sisk wrote:
>We attached a Kill-A-Watt to the switch powering phones in an engineers cube.  When the EEM script triggers switch power consumption drops by ~100W.  x 15 engineers in our area that is turning off 15x100w bulbs for 12 hours at a time.  The major impediment with that approach is the phones are hard down and do not respond to user input. 
>
>A solution that that provides similar level of power consumption while enabling user intervention would be best of both worlds.  Save power, save on cooling, save backlights, extremely nominal user impact = win.
>
>/Wes
>
>On Tuesday, March 23, 2010 1:50:53 PM, Fuermann, Jason <mailto:JBF005 at shsu.edu><JBF005 at shsu.edu> wrote:
>
>>I guess the question really is, what is the end goal of putting the rest of your phones in power save some kind of power save mode?
>>
>> 
>>
>>From: Chris Ward (chrward) [<mailto:chrward at cisco.com>mailto:chrward at cisco.com]
>>Sent: Tuesday, March 23, 2010 12:22 PM
>>To: Fuermann, Jason; Ryan Ratliff (rratliff); Matthew Loraditch
>>Cc: <mailto:cisco-voip at puck.nether.net>cisco-voip at puck.nether.net; Jamie Weatherhead
>>Subject: RE: [cisco-voip] 7940 Power Save Mode
>>
>> 
>>
>>Energywise support is not yet available on our phones. You can use Energywise to shutdown switchports, but not put the phones to sleepŠ YET.
>>
>> 
>>
>>When energywise is supported on the phones, it will have the ability to put them into a deep-sleep mode. It will however not be supported on the 7940/60s.
>>
>> 
>>
>>+Chris
>>
>> 
>>
>>From: <mailto:cisco-voip-bounces at puck.nether.net>cisco-voip-bounces at puck.nether.net [<mailto:cisco-voip-bounces at puck.nether.net>mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Fuermann, Jason
>>Sent: Tuesday, March 23, 2010 10:53 AM
>>To: Fuermann, Jason; Ryan Ratliff (rratliff); Matthew Loraditch
>>Cc: <mailto:cisco-voip at puck.nether.net>cisco-voip at puck.nether.net; Jamie Weatherhead
>>Subject: Re: [cisco-voip] 7940 Power Save Mode
>>
>> 
>>
>>Sorry, I was thinking of EnergyWise, not EEM
>>
>> 
>>
>>From: <mailto:cisco-voip-bounces at puck.nether.net>cisco-voip-bounces at puck.nether.net [<mailto:cisco-voip-bounces at puck.nether.net>mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Fuermann, Jason
>>Sent: Tuesday, March 23, 2010 9:43 AM
>>To: 'Ryan Ratliff'; Matthew Loraditch
>>Cc: <mailto:cisco-voip at puck.nether.net>cisco-voip at puck.nether.net; Jamie Weatherhead
>>Subject: Re: [cisco-voip] 7940 Power Save Mode
>>
>> 
>>
>>I'm sure EEM has some interface a standard user could interact with
>>
>> 
>>
>>From: <mailto:cisco-voip-bounces at puck.nether.net>cisco-voip-bounces at puck.nether.net [<mailto:cisco-voip-bounces at puck.nether.net>mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ryan Ratliff
>>Sent: Tuesday, March 23, 2010 9:42 AM
>>To: Matthew Loraditch
>>Cc: <mailto:cisco-voip at puck.nether.net>cisco-voip at puck.nether.net; Jamie Weatherhead
>>Subject: Re: [cisco-voip] 7940 Power Save Mode
>>
>> 
>>
>>You telnet in to the switch and do a 'no shut'.  We control the switches here in our cubes that power all of the phones.
>>
>> 
>>
>>-Ryan
>>
>> 
>>
>>On Mar 23, 2010, at 10:31 AM, Matthew Loraditch wrote:
>>
>> 
>>
>>How does that work if you need to work late or come in on off hours ?
>>
>> 
>>
>> 
>>
>>Matthew Loraditch, CCNA, CCDA
>>1965 Greenspring Drive
>>
>>Timonium, MD 21093 
>><mailto:support at heliontechnologies.com>support at heliontechnologies.com
>>(p) (410) 252-8830
>>(F) (443) 541-1593
>>
>>Visit us at <http://www.heliontechnologies.com/>www.heliontechnologies.com 
>>Support Issue? Email <mailto:support at heliontechnologies.com>support at heliontechnologies.com for fast assistance!
>>
>> 
>>
>>From: <mailto:cisco-voip-bounces at puck.nether.net>cisco-voip-bounces at puck.nether.net [<mailto:cisco-voip-bounces at puck.nether.net>mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Wes Sisk
>>Sent: Tuesday, March 23, 2010 10:27 AM
>>To: Matthew Ballard
>>Cc: <mailto:cisco-voip at puck.nether.net>cisco-voip at puck.nether.net; Jamie Weatherhead
>>Subject: Re: [cisco-voip] 7940 Power Save Mode
>>
>> 
>>
>>We implement an alternate powersave method on the phones at our desks. We use EEM script on switch to shutdown power to all non-critical phones outside business hours.  EEM script is available in the EEM script repository on <http://Cisco.com>Cisco.com.

>>
>>/Wes
>>
>>On Monday, March 22, 2010 12:48:36 PM, Matthew Ballard <mailto:mballard at otis.edu><mballard at otis.edu> wrote:
>>
>>The only reason the 7970 would need a power save mode is to turn off the backlight.  Since the 7940 doesn't have a backlight, a power save mode would save little to no power anyways.
>>
>> 
>>
>>Matthew Ballard
>>
>> 
>>
>> 
>>
>>From: <mailto:cisco-voip-bounces at puck.nether.net>cisco-voip-bounces at puck.nether.net [<mailto:cisco-voip-bounces at puck.nether.net>mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jamie Weatherhead
>>Sent: Monday, March 22, 2010 9:42 AM
>>To: <mailto:cisco-voip at puck.nether.net>cisco-voip at puck.nether.net
>>Subject: [cisco-voip] 7940 Power Save Mode
>>
>> 
>>
>>Afternoon all,
>>
>> 
>>
>>Is it at all possible to set a 7940 phone to power save mode?
>>
>> 
>>
>>I am able to achieve this for a 7970 phone by adjusting the 'Display Idle Timeout' setting on the phone device configuration page. However, the 7940 phone doesn't appear to have these settings as seen below:
>>
>><image001.png>
>>
>>Any help would be appreciated.
>>
>> 
>>
>>Jamie
>>
>>
>>Consider the environment - Think before you print
>>
>>The contents of this email are confidential to the intended recipient and may not be disclosed. Although it is believed that this email and any attachments are virus free, it is the responsibility of the recipient to confirm this. 
>>
>>You are advised that urgent, time-sensitive communications should not be sent by email. We hereby give you notice that a delivery receipt does not constitute acknowledgement or receipt by the intended recipient(s).
>>
>>Details of Charles Stanley group companies and their regulators (where applicable), can be found at this URL <http://www.charles-stanley.co.uk/contact-us/disclosure/>http://www.charles-stanley.co.uk/contact-us/disclosure/
>>
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>>
>>
>>
>>
>>
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>>_______________________________________________
>>cisco-voip mailing list
>><mailto:cisco-voip at puck.nether.net>cisco-voip at puck.nether.net
>><https://puck.nether.net/mailman/listinfo/cisco-voip>https://puck.nether.net/mailman/listinfo/cisco-voip
>> 
>>
>> 
>>
>>_______________________________________________
>>cisco-voip mailing list
>><mailto:cisco-voip at puck.nether.net>cisco-voip at puck.nether.net
>><https://puck.nether.net/mailman/listinfo/cisco-voip>https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>> 
>>
>>
>>
>>
>>_______________________________________________
>>cisco-voip mailing list
>><mailto:cisco-voip at puck.nether.net>cisco-voip at puck.nether.net
>><https://puck.nether.net/mailman/listinfo/cisco-voip>https://puck.nether.net/mailman/listinfo/cisco-voip
>> 
>>
>
>
>_______________________________________________
>cisco-voip mailing list
>cisco-voip at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-voip


-- 
leb at iridescent.org




More information about the cisco-voip mailing list