[cisco-voip] Dialogic SR140 doesn't mark packets with DSCP values

[Jason Aarons (US)]

Dialogic support indicated their SR140 T.38 fax board doesn't mark packets for QoS.

I'm trying to recall the best method to have the switchport mark all packets for DSCP EF.

Guess I got spoiled have phones mark packets and trust the phones...



-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100324/c08bc064/attachment.html>