[cisco-voip] Dialogic SR140 doesn't mark packets with DSCP values

[Mustafa]

Might be different based on what switch you are using.

On a 3750:
Switch (config-if)# mls qos cos 5
Switch (config-if)# mls qos cos override

the cos-dscp mapping will map cos 5 to DSCP 46.

Or you can use an access list with MQC to mark everything DSCP 46 coming in.

-- Mustafa

Jason Aarons (US) wrote:
>
> Dialogic support indicated their SR140 T.38 fax board doesn’t mark 
> packets for QoS.
>
> I’m trying to recall the best method to have the switchport mark all 
> packets for DSCP EF.
>
> Guess I got spoiled have phones mark packets and trust the phones…
>
> ------------------------------------------------------------------------
>
> *Disclaimer: This e-mail communication and any attachments may contain 
> confidential and privileged information and is for use by the 
> designated addressee(s) named above only. If you are not the intended 
> addressee, you are hereby notified that you have received this 
> communication in error and that any use or reproduction of this email 
> or its contents is strictly prohibited and may be unlawful. If you 
> have received this communication in error, please notify us 
> immediately by replying to this message and deleting it from your 
> computer. Thank you. *
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>