[cisco-voip] 2 questions regarding SIP/CUBE integration

[Cristobal Priego]

i had the same problem with supplementary services, and i configured
software mtp resources on the gateway, added it to the MRG and that pretty
much resolve my problem, try to add a SW MTP on the Cube and supplementary
services will work.

if you debug the cube do you see the caller id on the incoming call ?

2010/3/25 Frank Arrasmith <frank.arrasmith at gmail.com>

> Hi All,
>    I have a couple of questions regarding a new SIP integration that I am
> testing.  I have inbound and outbound calling working without any problems,
> but I am not seeing inbound caller ID, nor do supplementary services seem to
> work(hold/transfer). Here is the setup, and if anybody can help and needs
> more details, I can provide.
>
> SIP Provider<--SIP--> 2651xm(CUBE) <-- H323--> CUCM 6.1.2<--SCCP-->7960
>
> 1.  Caller ID-  outbound is good, but not inbound.  Should I be looking at
> the CM or at the CUBE  for this?
> 2. Supplementary Services- I have a software MTP configured for the call
> manager, but currently no hardware DSP in the Router for MTP.  Is this
> likely the problem?  We will eventually be running a 2800/3800 with DSPs,
> but i had the 2600 laying around so I tried it first.
>
> Thanks for any help in advance.
>
> --Frank
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100325/3bb0e5be/attachment.html>