[cisco-voip] VIC-4FXS/DID in a 2900

[Matthew Loraditch]

You can only use the VIC3 model
http://www.cisco.com/en/US/prod/collateral/routers/ps10538/aag_c07_563807.pdf


Matthew Loraditch, CCNA, CCDA
1965 Greenspring Drive
Timonium, MD 21093
support at heliontechnologies.com<mailto:support at heliontechnologies.com>
(p) (410) 252-8830
(F) (443) 541-1593

Visit us at www.heliontechnologies.com<http://www.heliontechnologies.com/>
Support Issue? Email support at heliontechnologies.com<mailto:support at heliontechnologies.com> for fast assistance!

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Brian Schultz
Sent: Friday, March 26, 2010 12:53 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] VIC-4FXS/DID in a 2900

I'm trying to find information if the older VIC-4FXS/DID module is supported in the new ISR G2 routers.  I only see reference to the new VIC3-4FXS/DID cards in the data sheet, but nothing that says whether the old cards will even work or not.  Does anyone know where I can find support information?

Thanks,
Brian
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100326/b1c42dd4/attachment.html>