[cisco-voip] VIC-4FXS/DID in a 2900

[Brian Schultz]

That's exactly what I was looking for.

Thanks,
Brian

On Fri, Mar 26, 2010 at 11:58 AM, Matthew Loraditch <
MLoraditch at heliontechnologies.com> wrote:

>  You can only use the VIC3 model
>
>
> http://www.cisco.com/en/US/prod/collateral/routers/ps10538/aag_c07_563807.pdf
>
>
>
>
>
> *Matthew Loraditch, CCNA, CCDA*
> 1965 Greenspring Drive
>
> Timonium, MD 21093
> support at heliontechnologies.com
> (p) (410) 252-8830
> (F) (443) 541-1593
>
> Visit us at www.heliontechnologies.com
> Support Issue? Email support at heliontechnologies.com for fast assistance!
>
>
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Brian Schultz
> *Sent:* Friday, March 26, 2010 12:53 PM
> *To:* cisco-voip at puck.nether.net
> *Subject:* [cisco-voip] VIC-4FXS/DID in a 2900
>
>
>
> I'm trying to find information if the older VIC-4FXS/DID module is
> supported in the new ISR G2 routers.  I only see reference to the new
> VIC3-4FXS/DID cards in the data sheet, but nothing that says whether the old
> cards will even work or not.  Does anyone know where I can find support
> information?
>
>
>
> Thanks,
>
> Brian
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100326/b595b473/attachment.html>