[cisco-voip] SRST and FXO with MGCP

[Lelio Fulgenzi]

ok, i've read a few posts (some of them mine) and it looks like in the end, if you want an FXO port that is usually configured via MGCP to CCM to be able to work properly (without secondary dialtone) in SRST mode, you simply put a "connection-plar XXXX" statement in the voice-port section. is that what others are doing? i read that "default-destination" in the call-manager-fallback section is being deprecated. 



! 
voice-port 0/2/1 
signal groundStart 
echo-cancel coverage 64 
timing hookflash-out 50 
connection plar XXXXX 
! 


also, how do i apply CORE lists to incoming calls on this port? 



dial-peer voice 9021 pots 
port 0/2/1 
corlist incoming XXXXX 
incoming called-number . 


i recall a while back if tried to create another dial-peer with the same voice port it caused problems. 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100330/021e99b9/attachment.html>