[cisco-voip] VWIC2-2MFT-T1/E1

[Bill]

Is there still an issue where I can not have two different clocking sources
from two different providers on the same two port card? One of the ports is
used as a PRI connection to a Nortel box where I am acting as the TELCO. I
want to use the other port as a local PRI to the PSTN. Should I split this
on two different cards? 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100503/8c46ed0b/attachment.html>