[cisco-voip] VWIC2-2MFT-T1/E1

[Michael Hayler]

Hi Bill

for me this setup was working fine over the last 2 years.

-> 3825 router with 3x VWIC2-2MFT-T1/E1.
3x PRI to the local telco provider and 3x PRI to our old Avaya/Bosch
System without Q.SIG
and of course I use the clock of the telco provider as the clocking
source :)

Cu Michael Hayler


Am 03.05.2010 20:04, schrieb Bill:
>
>  
>
> Is there still an issue where I can not have two different clocking
> sources from two different providers on the same two port card? One of
> the ports is used as a PRI connection to a Nortel box where I am
> acting as the TELCO. I want to use the other port as a local PRI to
> the PSTN. Should I split this on two different cards?
>
>  
>
>  
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>   

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100503/f90313b1/attachment.html>