[cisco-voip] VWIC2-2MFT-T1/E1

[Jason Aarons (US)]

yes the card has a single PLL, you should use 2 seperate cards.  I think another problem is the DSPs on backplane can't split clocking as well.

I wonder if their is a fix for this with G2s, etc.
________________________________
From: cisco-voip-bounces at puck.nether.net [cisco-voip-bounces at puck.nether.net] On Behalf Of Bill [bill at hitechconnection.net]
Sent: Monday, May 03, 2010 2:04 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] VWIC2-2MFT-T1/E1


Is there still an issue where I can not have two different clocking sources from two different providers on the same two port card? One of the ports is used as a PRI connection to a Nortel box where I am acting as the TELCO. I want to use the other port as a local PRI to the PSTN. Should I split this on two different cards?





-----------------------------------------
Disclaimer: 

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100503/79fc515d/attachment.html>