[cisco-voip] VWIC2-2MFT-T1/E1

[Bill]

So Jim says there is no problem but Jason says there is. Anyone know which
it is? 

 

  _____  

From: Jason Aarons (US) [mailto:jason.aarons at us.didata.com] 
Sent: Monday, May 03, 2010 3:36 PM
To: Bill; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] VWIC2-2MFT-T1/E1

 

yes the card has a single PLL, you should use 2 seperate cards.  I think
another problem is the DSPs on backplane can't split clocking as well.

 

I wonder if their is a fix for this with G2s, etc.

  _____  

From: cisco-voip-bounces at puck.nether.net
[cisco-voip-bounces at puck.nether.net] On Behalf Of Bill
[bill at hitechconnection.net]
Sent: Monday, May 03, 2010 2:04 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] VWIC2-2MFT-T1/E1

 

Is there still an issue where I can not have two different clocking sources
from two different providers on the same two port card? One of the ports is
used as a PRI connection to a Nortel box where I am acting as the TELCO. I
want to use the other port as a local PRI to the PSTN. Should I split this
on two different cards? 

 

 


  _____  

Disclaimer: This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the designated
addressee(s) named above only. If you are not the intended addressee, you
are hereby notified that you have received this communication in error and
that any use or reproduction of this email or its contents is strictly
prohibited and may be unlawful. If you have received this communication in
error, please notify us immediately by replying to this message and deleting
it from your computer. Thank you. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100503/3d03c9c4/attachment.html>