[cisco-voip] Send Calling Name over MGCP PRI (NI2)

[Ryan Ratliff]

Do they want it in a facility ie or a display ie?  The simplest way of delivering calling party name is to enable the display ie on outbound calls.

-Ryan

On May 4, 2010, at 9:02 AM, george.hendrix at l-3com.com wrote:

> Hello everyone,
>  
>   We have a CUCM 7.1 cluster connected to 3 PRI trunks using NI2 and they are configured as MGCP trunks in CUCM.  We have a requirement for "calling name" to be sent from the internal Cisco CUCM to the Telco.  From what I have read, we simply need to do the following:
>  
> On the MGCP gateway:
> Interface Serial0/0/0:23
> isdn supp-service name calling
> isdn outgoing ie facility
>  
> I have already checked the "Send Calling Name In Facility IE" checkbox on the MGCP endpoint configurations.
>  
> Is there something else I am missing to make this work?  The Telco has said that we simply need to configure our system to send the calling name info.  The PRI trunks to them are NI2.
>  
> Thanks,
>  
> Bill Hendrix
> george.hendrix at l-3com.com
>  
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100504/72b1f8eb/attachment.html>