[cisco-voip] phone button permissions

[Ryan Ratliff]

You'd probably need permission to modify phones to allow this.  The phone button template modification is for the templates under Device->Device Settings.

-Ryan

On May 4, 2010, at 12:37 PM, Scott Voll wrote:

> No.  Phone Button templates.
> 
> On the Phone device page, right above the line 1 there is a button, Modify button Items.
> 
> it allows you on a per device change a second button from line to a speed dial, or service button, etc.
> 
> On that page we are able to remove what is on the second button but then the orginal page goes to a 404 error and then you can't do anything else.
> 
> as the Admin of the CM, I can do this.
> 
> but I must be missing some permissions for my helpdesk that just does add / moves / changes.
> 
> Scott
> 
> On Tue, May 4, 2010 at 9:18 AM, Peter Slow <peter.slow at gmail.com> wrote:
> You mean softkey templates?
> 
> On Tue, May 4, 2010 at 11:20 AM, Scott Voll <svoll.voip at gmail.com> wrote:
> > I'm running Cm 6.1.4.2000-2
> > I have given our Helpdesk read / update permissions on "Phone Button
> > Template web pages" but when they go into change a phone template they can
> > move the second button down, but can not move anything over on a 7941 for
> > instance.
> > The original phone web page goes to error 404.
> > What permission do you need to be able to change dynamic phone templates?
> > TIA
> > Scott
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
> >
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100504/ae35a8bd/attachment.html>