[cisco-voip] SCCP41.8-3-5S the same as cmterm-7941_7961-sccp.8-3-5.cop.sgn

[Jason Aarons (US)]

Looking under Device Defaults for 7961G on CallManager 4.1(3)SR6 I see the customer is using SCCP41.8-3-5S.

I want to keep the same Device Defaults when upgrading to CallManager 7.1(2)SU2, so I assume I should install 7941_7961-sccp.8-3-5.cop.sgn.

My question is I notice in 4.1(3)SR6 the filename has a S at the end, where on downloads for SCCP 7961G I don't see a S for 8.3(5).

I know this is nit picky, but trying to avoid having 3,000 7961Gs change loads with upgrade.

-jason



-----------------------------------------
Disclaimer: 

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100504/82202ecb/attachment.html>