[cisco-voip] SCCP41.8-3-5S the same ascmterm-7941_7961-sccp.8-3-5.cop.sgn

[Chris Ward (chrward)]

S stands for signed. Every load you download from Cisco.com should
contain an S on the actual firmware files (maybe not the download link).

 

+Chris

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jason Aarons
(US)
Sent: Tuesday, May 04, 2010 3:06 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] SCCP41.8-3-5S the same
ascmterm-7941_7961-sccp.8-3-5.cop.sgn

 

Looking under Device Defaults for 7961G on CallManager 4.1(3)SR6 I see
the customer is using SCCP41.8-3-5S.

 

I want to keep the same Device Defaults when upgrading to CallManager
7.1(2)SU2, so I assume I should install 7941_7961-sccp.8-3-5.cop.sgn.

 

My question is I notice in 4.1(3)SR6 the filename has a S at the end,
where on downloads for SCCP 7961G I don't see a S for 8.3(5).  

 

I know this is nit picky, but trying to avoid having 3,000 7961Gs change
loads with upgrade.

 

-jason

________________________________

Disclaimer: This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the designated
addressee(s) named above only. If you are not the intended addressee,
you are hereby notified that you have received this communication in
error and that any use or reproduction of this email or its contents is
strictly prohibited and may be unlawful. If you have received this
communication in error, please notify us immediately by replying to this
message and deleting it from your computer. Thank you. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100504/565f0692/attachment.html>